Skip to content

Cart

Your cart is empty

Leisurecraft CT Mini POD Wood Burning Sauna

Sale price$6,936.50

Authorized Reseller — Shop With Confidence
Backyard Prime Living is a certified authorized reseller of all brands we carry. Every purchase includes full manufacturer warranty support and is backed by our commitment to extraordinary customer care.

Leisurecraft CT Mini POD Wood Burning Sauna
Leisurecraft CT Mini POD Wood Burning Sauna Sale price$6,936.50

Leisurecraft CT Mini POD Wood Burning Sauna

Description

The Leisurecraft Canadian Timber MiniPOD is a 2 to 4 person outdoor sauna built from 1.5-inch thick Eastern White Cedar and finished in a distinctive pod shape that makes it one of the most visually striking designs in the Canadian Timber lineup. Where a barrel sauna leans horizontal, the MiniPOD stands tall -- its rounded, raindrop silhouette rises vertically to a peak, which does two things that a barrel profile cannot: it gives taller users genuine headroom to stand and move around inside, and it sheds rain and snow off the curved exterior roof more aggressively, making it an especially practical design in climates that see serious winters.

 

The 7-foot by 7-foot footprint is compact enough to fit on a typical backyard pad, patio, or deck without dominating the space, yet the interior feels far more generous than the footprint suggests because the height opens up the air volume above the benches. Side wall benches run the full depth of the interior on both sides, seating up to 4 adults upright or 2 people lying down -- a configuration that Leisurecraft specifically engineered to leave the floor open for a wood-burning stove or electric heater installation directly on the center floor, rather than tucking the heater into a corner.

 

The roof is a proper triple-layer system: the cedar staves form the structural base, a layer of ice and water shield underlayment provides the waterproofing membrane, and Cambridge Dual Black asphalt shingles cap the exterior. This is a finished architectural roof, not a tarp or basic wrap, and it protects the structure in all four seasons without requiring additional roof work after assembly. The door features a large tempered glass window set in a cedar frame, bringing natural light into the interior and giving the front face of the sauna an open, finished look.

 

The MiniPOD ships as a flat-packed kit with pre-cut, pre-drilled Eastern White Cedar components, all hardware, and a full assembly manual and video guide. Assembly typically runs about 8 hours for two people and requires standard tools plus a jigsaw for the chimney cutout if a wood-burning stove is selected. The CTC77MW is the wood-burning configuration, designed for a floor-mounted wood stove with a chimney exiting through the rear wall. No electrical infrastructure is required for the heater, making it a strong choice for locations without convenient power access.

 

Backyard Prime Living is a certified authorized reseller of Leisurecraft. Every purchase includes full manufacturer warranty support and our commitment to extraordinary customer care. The CT MiniPOD carries a 5-year residential limited warranty from Dundalk Leisurecraft Inc.

 

NOTE: A wood-burning heater and chimney kit are required for this sauna to operate and must be selected at time of purchase. A level, solid foundation (concrete pad, wood deck, crushed stone, or paver blocks) is required prior to assembly and is the responsibility of the customer. A floor plate or adjustable installation base is required under the heater and must be selected at time of purchase.

 

Features

  • Handcrafted in Canada -- Every CT MiniPOD is individually built by Dundalk Leisurecraft Inc. in Melancthon, Ontario from 100% Canadian-sourced Eastern White Cedar. Leisurecraft is a family-owned manufacturer and eco-friendly company that sources wood exclusively from replenishing, sustainable mills.
  • Eastern White Cedar Construction -- Walls are constructed from 1.5-inch (35mm) thick Eastern White Cedar of select tight knot grade, providing superior insulation, natural rot resistance, insect resistance, and the aromatic warmth that defines the traditional sauna interior. No tenon joints are used along the stave length, ensuring clean, gapless construction.
  • Distinctive Raindrop Pod Shape -- The MiniPOD's vertical pod profile rises to a curved peak rather than lying horizontal like a barrel design. This shape creates substantially more standing headroom inside the cabin, allows taller users to move freely, and gives the exterior a sleek, modern silhouette that stands apart from every other shape in the Canadian Timber lineup. - Extra Headroom Over Barrel Designs -- The vertical rise of the MiniPOD shape means the peak interior height is significantly taller than a comparable barrel of similar width, making it the better choice for users over 6 feet or anyone who values room to stand and move inside a sauna.
  • 2 to 4 Person Side Wall Bench Configuration -- Side benches run the full interior depth on both walls, seating up to 4 adults upright or 2 people lying flat. Placing the benches on the side walls rather than the back wall frees the center floor entirely, allowing a wood-burning stove or electric heater to sit in the optimal heating position without consuming bench space.
  • Triple-Layer Asphalt Shingle Roof System -- The roof is built in three layers: cedar stave planks as the structural base, an ice and water shield membrane for waterproofing, and Cambridge Dual Black asphalt shingles as the finished exterior surface. This is not a basic wrap or add-on -- it is a complete architectural roof that protects the sauna in rain, snow, ice, and UV without requiring separate weatherproofing after assembly.
  • Large Tempered Glass Door Window -- The cedar door features a large full-pane tempered glass window that fills the upper portion of the door opening, admitting substantial natural light into the interior and giving the front face of the sauna a spa-like, open appearance.
  • Floor-Mounted Heater Position -- The benches-on-sides configuration leaves the center floor open for optimal heater placement. The included heater floor plate (required, available at time of purchase) provides a stable, level base for the stove and meets installation requirements.
  • Wood-Burning Heater Compatible -- The CTC77MW is configured for wood-burning stove installation with chimney exiting through the rear wall. No electrical infrastructure is required for the heater. Compatible heater options (Narvi Kuru 14, Narvi NC 16 Black, HUUM Hive Wood 13kW) are available as add-ons at time of purchase.
  • Ice and Water Shield Underlayment -- Six strips of 87-inch ice and water shield plus a 65-foot roll of 3-foot-wide shield are included in the kit for full roof underlayment installation before the asphalt shingles are applied.
  • Cedar Vent System -- A complete sauna vent kit is included, with stainless steel exterior vent grills for the front and rear walls and cedar interior vent covers, providing adjustable airflow control from inside the cabin.
  • Easy Assembly in About 8 Hours -- All cedar components are pre-cut and pre-drilled at the factory. The kit includes all required fasteners, an assembly manual, and access to a companion assembly video. Two people with standard tools can complete the build in approximately 8 hours.
  • 5-Year Residential Limited Warranty -- The CT MiniPOD structure carries a 5-year limited warranty against defects in materials and workmanship under normal residential use from Dundalk Leisurecraft Inc.

 

What's Included

INCLUDED WITH EVERY CT MINIPOD WOOD BURNING SAUNA KIT (CTC77MW):

  • 34 standard cedar wall staves (83" / 214cm long)
  • 2 flat-bottom cedar staves (83" / 214cm long)
  • 1 top stave assembly (83" / 214cm long)
  • Floor frame components: 2 front/back floor joists (80-1/4" with mitered corners), 2 side floor joists (78-1/2" with mitered corners), 5 middle floor joists (75-1/2")
  • 16 tongue-and-groove cedar floor boards (1x6 x 78-5/16" White Cedar)
  • Back wall panels (bottom, middle, and top sections) -- White Cedar
  • Front wall panels (bottom section, 2 side sections, top of door section) -- White Cedar
  • 2-meter cedar door with frame and hinges (58cm x 142cm, hinged on right)
  • 2 sets of bevel trim for exterior gable ends (5 pieces per set) -- White Cedar
  • 2 side benches (16-1/2" x 75-1/2" / 42cm x 192cm) -- White Cedar
  • 2 side backrests (19" x 75-1/2" / 48cm x 192cm) -- White Cedar
  • 4 side wall bench supports (20"x20" / 50cm) -- White Cedar
  • 4 wall mount bench supports -- White Cedar
  • Exterior door handle (small) -- White Cedar
  • Interior door handle (large) -- White Cedar
  • Complete sauna vent kit (front and rear wall vents)
  • 2 stainless steel exterior vent grills
  • Cedar interior vent cover
  • All hardware (screws, fasteners, hardware package)
  • 6 strips 87" ice and water shield
  • 65-foot roll (3-foot wide) ice and water shield
  • 4 bundles Cambridge Dual Black asphalt shingles (33.3 sq ft per bundle)
  • MiniPOD Sauna Owner's Manual

NOT INCLUDED / SOLD SEPARATELY:

  • Wood-burning heater (selection required at time of purchase: Narvi Kuru 14, Narvi NC 16 Black, HUUM Hive Wood 13kW, or no heater)
  • Heater floor plate (selection required at time of purchase: 23"x30" Stainless Steel Floor Plate or 23"x30" Adjustable Installation Base in Stainless Steel)
  • Chimney kit (required for wood-burning use; available at time of purchase: Chimney and Heat Shield Set for Out the Back Wall, or Chimney and Shields with Elbow for Out the Back Wall)
  • Foundation or base (concrete pad, wood deck, crushed stone, or paver blocks -- required; customer responsibility)
  • Sauna rocks (required for wood-burning stove; not included unless bundled with heater selection)
  • Sauna bucket and ladle - Exterior stain or wood sealer

 

NOTE: A chimney kit is required for all wood-burning stove installations. The heater floor plate selection is required at time of purchase. All heater installations must be performed in accordance with the heater manufacturer's instructions. Do NOT use a GFI/GFCI breaker for any electric heater connections. All electrical connections must be made by a licensed electrician.

 

Specifications

Manufacturer: Dundalk Leisurecraft Inc. (Leisurecraft)
Collection: Canadian Timber Collection
Model: CTC77MW
Heating Type: Wood-burning (compatible with wood-burning stoves only)
Capacity: 2 to 4 persons (4 sitting upright, 2 lying down)
Interior Footprint: 7 feet x 7 feet (approximately 184cm x 184cm)
Wall Thickness: 1.5 inches (35mm) Eastern White Cedar
Wood Species: Eastern White Cedar, select tight knot grade
Wood Sourcing: Sustainably sourced Canadian lumber
Country of Origin: Canada (handcrafted in Melancthon, Ontario)

 

EXTERNAL STRUCTURE DIMENSIONS:

Overall Exterior Width: 85-5/8 inches (217 cm)
Overall Exterior Depth: 85 inches (216 cm)
Overall Exterior Height/Height at Peak): 84 inches (213 cm)
Door Opening Width: 22-3/4 inches (58 cm)
Door Opening Height: 55-3/4 inches (142 cm)


INTERIOR BENCH AND FLOOR DIMENSIONS:

Interior Depth (bench zone): 76-3/4 inches (195 cm)
Interior Total Width (bench zone): 80-1/4 inches (204 cm)
Center Aisle Width: 35-1/4 inches (90 cm)
Each Bench Width: 16-1/2 inches (41 cm)
Each Bench Length: 75-1/2 inches (192 cm)
Bench Height: 19-1/4 inches (49 cm)
Bench Backrest Width: 19 inches (48 cm) per side

 

WARRANTY:

Structure: 5-year residential limited warranty (Dundalk Leisurecraft Inc.)
Coverage: Defects in materials and workmanship under normal residential use
Exclusions: Normal wear and tear, improper installation, insufficient maintenance, natural weathering, failure to follow manufacturer care instructions
Parts Policy: Warranty covers replacement parts only -- service, labor, and installation costs are excluded
Heater Warranty: Narvi: 2 years (excludes glass door, ash grate, rocks); HUUM Hive Wood: 3 years (excludes glass door, ash grate, rocks); Leisurecraft chimney kits: 5 years

SHIPPING:

Crate Weight: 1,403 lbs (636 kg) -- note: packaged weight can vary depending on heater and options selected
Shipping Dimensions (crate): 84 inches x 45 inches x 44 inches
Delivery Method: LTL freight, curbside delivery (standard)
Packaging: Single wooden crate
Lead Time: 2 - 4 weeks
Assembly Time: Approximately 8 hours (2 people recommended)

 

Downloads:

Product Drawing

Parts List

Assembly Instructions

 

CT Mini Pod Wood Burning Sauna

 

CT Mini Pod Assembly